CME-0555

Product Summary: The CME0555 is a development system for the Motorola MPC555 PowerPC Microcontroller. The system is Plug and Play with the supplied Axiom Monitor provided in on-board PROM, 128K x 32 (512K bytes) Fast SRAM, 128K x 32 (512K bytes) minimum external Flash EPROM, Serial Cable, 9v 500ma Wall Plug, printed hardware manual and the MPC5xx support CD with programming utilities, support software, source codes and technical manuals. Compatible with all MPC555 C compilers and tool suites for application development.

Features:

• MPC555 Controller
• Standard fixed memory:
• 128K x 32 Fast SRAM
• 28K x 32 Flash EPROM minimum
• Two Configurable 32pin memory sockets for 32K to 2MByte PROM and 32K to 512KByte SRAM
• 32 Bit Bus support with 8 bit memory bank control
• COM1 - SCI1 w/ RS232 type DB9-S Connection
• COM2 - SCI2 w/ RS232 type DB9-P Connection
• 2 TouCAN Ports w/ 1M baud transceivers
• LCD Interface Connectors w/ Contrast Adjust, Memory Mapped (80 or 160 character)
• Keypad Interface Connectors, 16 or 20 Key
• 60 pin BUS_PORT w/ 32 data and 24 address
• 34 pin CONTROL_PORT w/ Bus Control signals
• 14 pin QSM_PORT serial port I/O
• 34 pin MIOS_PORT with PWM and parallel I/O
• 34 pin TPU_PORT with Timer Module I/O
• 34 pin QADC_PORT with Analog I/O
• 10 pin INT_PORT with Interrupt I/O
• Power_Port w/ Power supply access
• Background Debug Mode (BDM) connector
• All I/O connectors in .1 grid to maximize use
• Large Prototyping Area w/ solderless breadboard
• 6 to 25VDC Input to 5V @ 2A Switching Supply and 3.3V @1.5A Power Supply
• Typical Operating Power: 400ma @ 40MHz
• User Indicators, Pot, and Switches for easy application development
• Easy configuration with Mode Switches and Option Jumpers

Package Contents: The Axiom development system provides for low cost software testing with the use of the Monitor in the on-board EPROM. Operations allow the user to load code in the On-Board RAM, Execute application, and display or modify registers or memory. After code is operational the user may relocate the code and reprogram the MPC555 Internal Flash EEprom or the boards fixed flash for dedicated operation of new software. No additional hardware or software is required to operate. For high level debug, extensive tools are available for the PowerPC core and the Debug Port is available to connect a background debugger.