CML-9S12DP512

Product Summary: The CML-912SDP512 is a low cost development system for the Motorola MC9S12DP512 Microcontroller. The board provides operation in Single-Chip Mode with the Expanded Wide Bus available for expansion and development memory access. The system is supplied with Monitor / Debugger installed with programming support utilities. Features provide for easy selection of operation mode, flash programming, BDM operation, keypad and LCD module connections, and prototyping. All required power supplies and support software is included to complete and program an application.

Features: • MC9S12DP512 Features:
Upward code compatible w/ 68HC11
4K Bytes EEPROM
512K Byte Flash EEPROM
14K Byte SRAM
2 Enhanced SCI Ports
3 SPI Port (Synchronous Serial)
5 CAN 2.0 A or B Interface
Two 8 Channel 10 Bit Analog Converters
Background Debug Port
Enhanced 16 bit Timer w/ 8 channels
of capture or compare
16 Bit Pulse Accumulator
8 PWM Channels
Two 8 bit Key Wake-up ports
PLL Clock Oscillator Support
RTC and COP features
Up to 91 I/O
• 4Mhz reference oscillator for up to 24MHz operation.
• External Memory: 256K Bytes (128K x 16) SRAM
• COM1 Port – HC12 SCI0 w/ RS232 and DB9S connector
• COM2 Port – HC12 SCI1 w/ RS232 and 3 pin header
• INDICATORS – Power and RESET.
• BUS-PORT – 40 Pin Socket Header
• MCU I/O PORT - 60 pin Socket Header
• Analog Port – 20 pin Socket Header
• CAN PORT – CAN 0 I/O with 1M Baud Transceiver
• LCD Module and Keypad Ports
• Solderless Prototype Area and Connections
• Easy Power Connection and Tap points
• Back Ground Debug (BDM) Port – 6 Pin standard

Specifications: • 7 to 25VDC input to 5V Power Supply
• Operating Power: 60ma @ 5V

Package Contents: The Axiom development system provides for low cost software debugging with the use of a Debug Monitor installed in the internal or external memory. Operation allows the user to locate code in the On-Board RAM, set Break Points, Trace, and display or modify registers or memory. After code is operational the user may relocate the code and program the MC9S12DP512 internal Flash for dedicated operation of new software. No additional hardware or software is required. Board is compatible with standard HC12 BDM pods and software compilers that provide an integrated debug interface.