CML-5213-DEV-BDM

The CML-5213-DEV-BDM is a low cost development system for the Freescale MCF5213 ColdFire microcontroller. Application development is quick and easy with the included DB9 serial cable and dBUG firmware monitor.  The BDM port is compatible with standard ColdFire BDM / JTAG interface cables and hosting software, allowing easy application debugging and development with a variety of hardware and software tools.

This package comes with our Coldfire USB Background Debug Module! giving you fast programming and debugging from your PC's USB 2.0 port. Works with CodeWarrior!

• MCF5213 CPU, 100 pin LQFP
• 256K Byte Flash (on-chip)
• 32K Byte SRAM (on-chip)
• DMA Controller w/ four 32-bit Timers
• Interrupt Controller
• 8 Channel 12-bit A/D
• QSPI, IIC, and CAN Serial Ports
• 3 UART Serial Ports with DMA capability
• Edge / Interrupt Port
• 8 PWM timers
• 4 16-bit GPT Timers
• BDM / JTAG Port
• Internal 8MHz Oscillator
• 3.3V operation
• 8MHz reference crystal                                
  
• MCU port, 60 pin I/O port                               
  
• BDM / JTAG Port, 26-pin development port                
  
• UART0 / Terminal Port w/ RS232 DB9-S Connector          
  
• UART1 Port w/ RS232 DB9-S Connector                     
  
• UART2 / CAN port w/ RS232 and 1Mbaud CAN transceiver    
  
• RESET switch and indicator                              
  
• ABORT (IRQ7) switch                                     
  
• 4 User Indicators (LEDs)                                
  
• 2 User Push Switches                                    
  
• 2.4GHz Zigbee" capable RF Transceiver                   
  
• Regulated +3.3V power supply w/ indicator               
  

• Board Size: 3.5” x 5.5”
• Power Input: +5 - +25VDC, 9VDC typical
• Current Consumption: 100ma @ 9VDC input

Develolpment Board, BDM Cable, DB9 Serial Cable, Utility / Support CD, Manuals and a universal wall adapter power supply.